Cervis TM70 Manual do Utilizador descarregar pdf (Página 25)

System User Manual

11. Press the START Button to Save the displayed value. The value will be

memorized for that calibration item. Communication with the receiver will

stop.

12. Press

Pushbutton 1 to return to the previous menu to edit the Units.

Units can be no more than three (3) characters.

13. Press

STOP and restart the crane. Replace the current load with another

known load.

14. Repeat process

Steps 9 through 12 to calibrate Value 2.

15. Press

STOP and restart the crane.

The system will now be ready for service.

Note: Data appearing in the display will be inconsistent and unreliable until

calibration is performed.

Note: Calibration allows negative values.

Note: Modified feedback calibration data is not automatically updated in the receiver

EEPROM. The new information must be copied from the transmitter EEPROM

into the receiver EEPROM.

Calibration Example of a Load Cell

1. Get into Calibration mode. Enter Value 1 to represent the hook with no

load.

2. Press

START to validate the entry. Turn the transmitter OFF.

3. Start the system again and raise a known load.

4. Turn the transmitter OFF and then restart.

5. Enter Calibration mode again. Set

Value 2.

6. Press

START to validate the entry.

7. Press

Pushbutton 1 to edit the Units.

8. Press

START to validate the Units.

9. Turn the transmitter

OFF.

The equipment should now be calibrated and ready for use.

4.6 Range Limiter

TM70 radio remote control systems LA70 Infrared Range Limiter transmitter option

prohibits the system from being operated outside a defined working area. The operator

must be within Line-Of-Sight of the LA70 transmitter to control the machine.

The system consists of one or more LA70 Infrared transmitters. The LA70 transmitter is

installed in a fixed position or on the controlled crane and positioned to cover the

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 36 37

Comentários a estes Manuais

Sem comentários

Cervis TM70 Manual do Utilizador Página 25

Comentários a estes Manuais