Cervis TM70 Manual do Utilizador descarregar pdf (Página 7)

I K U S I

21/05/2008

TRANSMITTER LED STATUS

CHART 4

9 Check the Transmitter Led Status as described below in order to fix the system. Once the system is fixed, go to . ( ).

START

CHART 1 (I)

LED MEANS RECOMMENDED ACTION

Solid Green Transmitter transmitting normally No action (transmitter OK).

OPERATION mode.

Green pulses Transmitter ready for start-up. Press start push button.

STAND-BY mode.

Red slow flashing Battery level low. Replace ref. 2303692 BT06K

charged battery.

Red fast flashing Probably EEPROM module is not Plug the EEPROM card in the

plugged in. transmitter or change it.

Red double flashing Transmitter cannot start up because a Push & pull STOP push button.

manoeuvre command is present. If the problem remains, check the

push buttons and if OK, replace

LE71 or LE72 board.

Solid red or Not Lit Transmitter failure. Replace the transmitter logic

board (LE71 or LE72).