Cervis TM70 Manual de Instalação descarregar pdf (Página 93)

Operation and Installation Manual

2013 Cervis, Inc.

25.2.9 Troubleshooting

Table 44. Troubleshooting

Error Type

On Screen Description

Comments

ERROR 1

Hardware Not Detected

More than one joystick moves together

No output associated

More than two associated outputs (maximum 2

associated analog outputs per lever/joystick)

ERROR 2

Hardware Not Detected Expansion is not initialized (output associated absent)

Place Enable Jumper

Initialized expansion, Tele-Alignment jumper not

connected.

ERROR 3

Two Joystick Selected

When moving the analog paddle to adjust, more than

one axis/joystick outputs are selected.

Different Joystick

A different joystick than selected moved when the

Tele-Alignment menu starts.

ERROR 4

This Adjust Not Possible

If the expansion’s output relay only activates when

Cmin exceeded.

ERROR 5

This Adjust Not Possible Output relay is activated when link exist.

Put Joystick To Neutral If the adjustment is possible and any paddle moves.

GEN. ERROR

No Access To Memory No access to memory to update data.

Adjust Not Valid The expansion indicates invalid values.

Quest./Answ. Not Valid

Erroneous communication between RX and

expansions.

No Answer Of Expans. The expansion doesn’t answer; communication error.

Error Other error.

25.2.10 Menu 3.2 Reset Values

Restores all outputs that support Tele-Alignment to default values.

25.2.11 Menu 3.3 FORB CAL MEN

Used to disable or cancel an entry to the Tele-Alignment menu. User should use Recorder

and/or TM70Config if the entry needs to be re-activated.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 102 103

Comentários a estes Manuais

Sem comentários

Cervis TM70 Manual de Instalação Página 93

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Cervis TM70