Cervis TM70 Manual do Utilizador descarregar pdf (Página 12)

Technical Assistance Services (01/08) 9

Consult the section on models for the selection of the remote control. We should

remember that if the crane is standard it will in all certainty have its corresponding standard remote

control, totally personalized, after consulting the crane manufacturer.

2.23.- MODIFICATIONS

Accompanying each unit manufactured is a manufacture card indicating all of the features

of the unit.

It is possible that the crane with which a remote control worked, could be replaced by

another, or some modification could be made in it causing the remote control to no longer adapt to

the new needs of the crane.

All units can be modified to adapt to the new configuration of the crane. Said modification

can be carried out by IKUSI or by one of its distributors.

All modifications must be reported to the factory for up-dating of the manufacture card. It is

very important to have the manufacture card up-to-date in order to avoid errors in future

replacement parts.

3.- LOCATION OF FAILURES

3.1.- THE CRANE DOES NOT WORK WITH THE REMOTE CONTROL VIA RADIO OR WITH

THE CABLE CONTROL

3.2.- THE REMOTE CONTROL WORKS, OR LOSES SIGNAL FROM TIME TO TIME, WHEN

ASSISTING

The crane does not

work

with the remote control

via radio or with the

cable control

Call the crane

assistance service

The remote control works

correctly or loses,

from time to time,

the signal

when assisting

Change

the frequency

Verify and finish

Make a plan of

the frequencies of all

the equipment of the plant

Yes

Another

item of equipment

with repeated

frequency?

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 48 49

Comentários a estes Manuais

Sem comentários

Cervis TM70 Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Cervis TM70