Cervis TM70 Manual do Utilizador descarregar pdf (Página 28)

Technical Assistance Services (01/08) 25

The MO70 is an optical controller with a control that can direct a maximum of 32 steps for

each axis (North, South, East and West) in two perpendicular positions (Vertical and Horizontal).

In the MO70 can be customized the number of steps of each semiaxis; 1 to 5 or stepless.

Also, it can be selected the operating mode between:

Open gate: Can be act diagonally, acting in two senses at once.

Single axis: can be act only in one axis.

Cross gate: Can be act in both axis, but only one at a time.

4.12.1. Mechanical Configuration: the number of steps is made a positioning parts with

machining steps of 1,2,3,4 or 5 steps or stepless. Open working mode, online or cross is

performed through the open top but the limiting parts. The working mode of Open gate, Single axis

or Cross gate is made by cover and limiting parts.

In the Mo70 adds the ability to limit the travel with pieces of plastic that are placed on the cover

itself, these parts can only be placed with 5-step positioning parts. The two halves are joined to

form one piece and placed on the cover.

4.12.2. Electronic configuration: The number of steps of each semiaxis and the working

mode is customized by the 8 positions microswitch of the electronic board. The 1st,2nd and 3rd

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 48 49

Sem comentários

Cervis TM70 Manual do Utilizador Página 28