
Technical Assistance Services (01/08) 10
3.3.- THE REMOTE CONTROL DOES NOTHING OR A SPECIFIC OPERATION DOES NOT
WORK WHEN ASSISTING
Replace
the reception
antenna
Activate operations
and check the outputs
Replace
the receiver
logic
Copy the eeprom
of the emitter
to that of the receiver
Replace
the receiver
logic
Without power, withdraw the eeprom from the
receiver, place it in the transmitter and reactivate it
Is there
a spare
transmitter?
Replace the
electronics card
of the transmitter
Is the power
supply
connection
correct?
Replace the eeprom
of the receiver with
that of the transmitter
Does the signa
lLED flash
when
coming on?
The remote-control does
nothing or a specific
operation does not
work when assisting
Copy the eeprom
from the receiver
in a new eeprom
Interference.
Change
the frequency
Modify the power
supply connection
The signal LED comes on
whenever a signal is received
with its work frequency.
Activate the transmitter
Are all
the relays
activated?
The remote control works
correctly or loses,
from time to time,
the signal
when assisting
The equipment works
correctly.
Carry out the
source tests:
The transmitter LED will be off or will show static
red colour. Replace the battery to rule out the
possibility of it not being charged
Is the LED
green when it
comes on?
Is the LED
green when it
comes on?
Is the LED
green when it
comes on?
Does the signal
LED flash
when
coming on?
Replace
the receiver
logic
Replace
the receiver
logic
Is there any
physically
broken
mechanism?
Comentários a estes Manuais