Cervis TM70 Manual do Utilizador descarregar pdf (Página 31)

Technical Assistance Services (01/08) 28

the button is pushed codes will determine which transmitters can work with said crane. The first

transmitter to send the start order will be the first to take charge of the control of the crane, and will

not to free the crane , there is another transmitter turned on and pushing start, said transmitter

takes charge of the crane automatically without the Stop relays falling.

In this way the users of the same crane with different transmitters can pass the same in

movement.

5.3.- TANDEM

There are jobs of movement of parts which, due to their great length, cannot be moved with

a single bridge of a crane and are moved with two bridge cranes which carry out the same

2. One of the personalized transmitters

pushes start and takes charge of the

crane.

3. Only the transmitter that has taken the

crane will work. The receiver ignores the

rest of the transmitters.

5. To release control of the crane, the

operator who has been requested to turn it

off must turn off the unit pushing the

button.

4. A second transmitter wants to continue

with the movement and take charge of the

crane. To do this, it must turn on the

transmitter, push start and ask the

operator of the transmitter that is working

to turn it off.

6. Now the second transmitter takes the

crane and finishes the movement.

1. The receiver will begin to scan to check

if any transmitter of those personalized

requests work.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 48 49

Sem comentários

Cervis TM70 Manual do Utilizador Página 31