Cervis TM70 Manual do Utilizador descarregar pdf (Página 40)

Technical Assistance Services (01/08) 37

eeprom. A receiver will only start working when it receives the signal from the transmitter which

has its same eeprom.

It is possible that for some reason, for example, the crushing of a transmitter, the eeprom of

the transmitter is destroyed and on replacing the unit crushed with a new transmitter we will also

need a new eeprom, with the data of the unit. This operation is called copying of eeprom and

consists of copying the data of the eeprom of the receiver on a virgin eeprom for the transmitter or

vice versa, as indicated on following page.

Copying of the eeprom can only be done by qualified personnel and it will only be done

when they are certain that the eeprom to be substituted is totally unusable and whenever an

eeprom is recorded, the old one must be eliminated, to prevent two units from having the same

eeprom and therefore, the same data.

6.1.- CHANGING OF BASE CHANNEL (FREQUENCY) IKONTROL

The industrial units, as always, are installed in the plant itself and work with the same

frequency. To avoid interference every user must, at all times, have a listing of the units owned

with their working frequencies and check to ensure that they do not have units working on the

same frequency.

Put the eeprom you want to copy IN ITS

location LE74. Press and hold the B

button and then power the receiver.

The LED INIT blinks once in amber, two in

green and make 4 double blinks red

double beeps accompanied by the buzzer.

Then will flashing amber, at which time

we will stop pressing the button B. The

INIT LED will stay lit green.

Press button B. The LED INIT flash in

amber and turns on green light, at that

moment we will stop pressing the

button B. The LED INIT remains off.

Replace the eeproms in their appropriate

locations and turns off the transmitter.,

wait to the red led POWER turns off.

Reconnect the computer, the led of the

INIT will blink in green to load the eeprom

and all started working.

Without disconnecting the transmitter.

Remove from LE74 the eeprom EP70

that we wanted record and put the

eeprom EP70 that we wont to record

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 48 49

Sem comentários

Cervis TM70 Manual do Utilizador Página 40